Last updated: November 17, 2020

What Is A Dual Bevel Miter Saw?

Published 2:42 pm

Introduction

When you’re thinking of buying a compound miter saw, you might not know the right type of saw you should buy. There are various models and types of miter saws with differences and quite daunting. If you’re searching for a saw that is capable of making bevel cuts, then you’ve made the first step in the right direction. Next, you’ll know that you need to buy a compound miter saw.

A miter(compound) cut is a type of cut that is a combination of a bevel and miter cut. This kind of cut needs a fair amount of calculation and preparation and is used when working with crown molding.

If you’re handling a job that requires you to create angled cuts in two planes, like in crown molding and picture frames, then regularly a single-bevel compound miter saw will be suitable. This saw will pivot to let you make angle cuts on both sides and make beveling cuts in a particular direction. This is why it’s known as a “single bevel.”

.This compound saw can be manipulated on the two axes when you are making a compound miter cut. Although, you may need to turn over the workpiece and reset the angle, making sure that it’s accurate before making the next bevel cut.

Now, if you’re wondering what a bevel cut is, it is a kind of angled cut, but in contrast to a miter cut that is along the flat side, a beveling cut is an angled cut that is cut along the vertical plane. When you cut the edge of a workpiece at an angle other than 90 degrees with the saw blade bent over, you’ve made a bevel cut.

Making a cut(miter), on the other hand, is the process of chopping two bits of wood or material at an angle that is anything but 90 degrees along the length of the wood and the blade in a vertical position. You can learn more here what is a miter saw

The Dual or Double Bevel Miter Saw

The double bevel miter saw is way more versatile than the regular compound miter saw, and they have some significant differences that you should know about. For example, when making bevel angled cuts along a vertical plane, the average miter saw can only be capable of doing so in one direction, which means that you’ll have to make the same cut on the opposite side of the material. You cannot bevel the blade in the other direction, but you will have to lift the material you’re working with and bend it over to make matching cuts on the other side.

On the other hand, you don’t have to go through this process when you’re using a dual bevel miter saw as it allows the blade to pivot or bevel in both directions. It can tilt right or left, and you wouldn’t have to turn over the workpiece.

Why You Need a Dual Bevel Miter Saw

A double-bevel miter saw is capable of making a more precise angle selection. This allows you to make a pick of any angle from 0 to 45 to even 60 degrees.

A dual bever miter saw is a versatile tool that can perform bevel and miter cuts without making it too tasking for the user. This tool may not be considered an essential tool in the work shed, but it is quite helpful and accurate; it can do any task that a regular miter saw and compound miter saw can do.

You don’t have to continually re-position and replace your workpiece when working with a dual miter saw, which allows you to focus better on achieving excellent results. A dual miter saw is relatively easy to control and manipulate, making your job more steady and neat.

A dual bevel miter saw may not be the cheapest in the market, but it’s worth every penny and will perform more work than a single bevel miter saw. Your performance would be a lot more precise, and without any confusion, it also comes with a tilting design that makes it capable of re-positioning the workpieces. You can tilt the miter saw backward and then adjust the position of the material. You don’t have to bother about flipping the miter saw to cut both sides. Just make use of its existing features and options.

Conclusion

The dual bevel saw is quite powerful, and if it isn’t used properly and safely, it may cause serious injuries. Make sure you wear protective gear, read the user and safety manual, and use the right type of saw for the job. Also, when you’re making an adjustment or observation, make sure you turn off the miter saw so that you can get a closer look at the workpiece safely. If you can afford to get a dual bevel miter saw, you should purchase it to make your workflow smoother and more comfortable.